mylogo

Typically, a 25-pound pack of tile glue is quite inexpensive. If you make a mistake with the choice, then there should not be a big upset - such a purchase will not affect your budget. But if you glue tiles permanently? What then? Indeed, in this case, you must stock up with a large batch of glue. If suddenly it turns out that it has poor coupling properties, then it will be a real financial catastrophe. And the time for plywood tiles will take a lot. Not to mention that delivering a heavy dry mix is ​​not an easy job. That is why it is better to immediately buy the perfect product, even if it will cost a little more. Let's find out which tile adhesive is the best.

 

 

1

Tile glue which company choose

Now a good tile adhesive has been learned to do in many countries of the world. Including there are quite good copies from domestic manufacturers. If you want to calculate the total number of companies manufacturing tile adhesives, you cannot do this.

The fact is that some of them only supply products to the nearest cities. Few companies operate across the country. And only selected people, whose products have already won many awards and positive reviews, supply tiled glue abroad.

In Russia, the most popular tile adhesive under the following brands:

1. Knuf

2. Bergauf

3. Ivsil

4. Ceresit

5. Unis

But in stores you can easily find the products of some other companies. And it is absolutely not necessary that it will be of low quality - the competition in this market is very high.

Best tile adhesive

Eunice 2000

Unis 2000

The manufacturer of this tile adhesive is so confident in its product that it even provides a 15-year warranty! Recently, this is indicated on the box with glue, right next to the manufacturer's logo.

This product is intended for gluing mosaic and tiles, as well as porcelain stoneware and natural stone. Works can be performed not only indoors, but also outside. The dried glue easily transfers even severe frosts. Material consumption ranges from 3.75 to 5 kg per 1 sq. M, depending on the severity of the tile and climatic conditions.

Advantages:

  • The solution is viable for three hours;
  • Fits absolutely any tile;
  • Not afraid of either water or sub-zero temperatures;
  • Adhesion strength reaches 1 MPa;
  • It is possible to align differences of up to 15 mm;
  • Fast drying.

Disadvantages:

  • The pace of work should be high.

Litoflex K80

Litoflex K80.jpg1

First of all, this adhesive mixture was created to work with porcelain stoneware. But it is regularly bought and for gluing wall tiles. The product is considered professional because it has high adhesion rates.

Neither high nor low temperatures can affect the adhesive. This allows us to recommend the adhesive mixture for arranging underfloor heating, it is also possible to use it when laying tiles on tiles. Buyers note the high elasticity of the product, so that the solution can be applied in a thin layer, achieving low consumption.

Advantages:

  • Minimum consumption of glue;
  • Not afraid of high or too low temperatures;
  • Successfully holds even heavy ceramic granite;
  • Packages of various sizes are available.

Disadvantages:

  • Too high cost.

Cesesit CM-11

Cesesit CM 11

Packaging with this tile adhesive is not amazing beauty. But the product, manufactured by Henkel, has excellent adhesion properties.

That is why it is used not only by ordinary people who have decided to make repairs in their apartment, but also by professionals involved in decorating for many years. The creators have tried to make their glue universal.

In this regard, it can not withstand very heavy tiles - this should be taken into account. But if the weight of the tile does not exceed the threshold value, then it will hold on forever, because the adhesion of the product is 1.0 MPa. At the same time it is possible to glue a tile even on not the most equal surface.

Advantages:

  • The optimal price tag;
  • Quickly grabs;
  • High adhesion;
  • Can be used on uneven surfaces;
  • Ideal for interior decoration.

Disadvantages:

  • Not the best option for heavy stoneware;
  • For exterior decorating is not the best way.

Knuf fliesen

Knuf fliesen

If you read the reviews of people engaged in finishing work on a professional basis, you get the impression that KNAUF Fliesen is the perfect glue. The dry mix from the German manufacturer is easy to induce, and it is extremely difficult to find fault with the quality of work. This glue is equally good at laying tiles on the floor and on the walls. It also does not matter how smooth the surface is.

The glue dries quite slowly. But this even goes to him as a plus, since it is possible to have time to clean the seams, wipe them and, if necessary, trim the tiles. The creators recommend applying their product with a layer of 0.7 mm. Even such a small amount of mass will reliably hold the tile, how heavy it would be. It turns out that a 25-pound package is enough for facing a very large room!

Advantages:

  • Glue consumption can be called minimal;
  • It is possible to carry out work "under the comb";
  • Slow drying allows you to clean and wipe the seams;
  • Relatively low cost;
  • Perfectly copes with floor and wall tiles;
  • Serious temperature drops are not terrible.

Disadvantages:

  • None.

Keraflex maxi

Keraflex maxi

If you are going to produce a large-format tiles, then you need something special. Ordinary glue will not stand so much gravity. But such a tile will be able to keep Keraflex Maxi from the company MAPEI. This glue is expensive, but it is plastic and easy to use, and absolutely any building materials can hold it. Sliding in the process of laying almost completely excluded. According to the creators, their creation does not have any restrictions in the areas of application.

Advantages:

  • Ideally holds a very large tile on a vertical surface;
  • Easy breeding;
  • The glue is plastic, thanks to which it is easy to use;
  • No prior alignment of the walls is required.

Disadvantages:

  • Buying is not cheap.

Bolars WallFix Keramik

Bollars WallFix Keramik

This glue differs from many competitors in that it comes in a plastic bucket. Its volume can be completely different - you can pick up the amount of glue that is needed for facing a particular room. The product is acrylic, it is suitable for working with any tile and mosaic, the water absorption of which exceeds 3%.

The surface can also be practically any - the creators themselves mention cement plaster, concrete, screeds, drywall and gypsum plaster. Glue is not afraid of a strong temperature change, so it can be used to install the system "warm floor". But the operating temperature should not go into the minus, so the product is intended only for internal work.

Advantages:

  • Holds almost any tile;
  • Convenient packaging;
  • Easy application;
  • Environmentally safe;
  • Adjustment time reaches half an hour.

Disadvantages:

  • Does not withstand freezing temperatures;
  • Very high price tag;
  • Increased consumption;
  • Full drying only in a week.

Glims whitefix

Glims whitefix

If you are engaged in finishing a rich room, then it is possible that you will use natural stone. For its gluing it is impossible to use ordinary tiled glue, as its coupling properties simply will not be enough. Instead, you will have to buy a more expensive Glims WhiteFix glue. It is primarily intended to work with natural stone. This product is supplied in the usual paper packaging, which interferes with 25 kg of dry mix.

The product is made in Russia. If the solution of ordinary tiled glue is in working condition for 2-3 hours, then Glims WhiteFix can interact for up to four hours. And this is important, because working with a thin stone can take a lot of time. Also this glue can be used for laying ceramic and glass mosaic, translucent luxury tiles and some other materials. It is allowed to use a product not only indoors, but also outside. This opens up possibilities for finishing pools, balconies, terraces and other objects. As it is easy to guess, the glue is not afraid of water at all, so it can be used for facing the shower room.

Advantages:

  • Retains even natural and artificial stone;
  • Not afraid of frost or water;
  • The optimal correction time;
  • Drying time does not exceed 24 hours;
  • Consumption is not big.

Disadvantages:

  • Many people seem too expensive.

Which tile glue to buy

1. If you are ready to work at a high pace, then you should consider buying Eunice 2000. In fact, this is the perfect tile adhesive. It dries quickly, holding then even the heaviest tiles. But this is also a disadvantage - if you hesitate, you will not be able to do anything with stitches.

2. Gluing mix Litoflex K80 is ideal for cladding facades. When using it, you will be sure that the porcelain tile or tile will not fall off even if terrible frosts happen in your area. The lack of fear of a strong change in temperature makes this mass a good choice also for laying warm floors.

3. Cesesit CM-11 must be purchased under two conditions. First, you are going to glue the tiles for the first time. Secondly, the case will take place indoors, not on the street. Also this glue will perfectly cope with its task in the event that the surface is not very even.

4. If you have the opportunity to purchase KNAUF Fliesen, be sure to use it. This tile adhesive does not have any serious flaws. It has a low consumption, the dried mass is not afraid of high or low temperatures, and the work can be done even in a room with uneven walls. Surprisingly, packaging with such glue is not worth some space money!

5. Best of all, Keraflex Maxi holds a very heavy tile. This dry mixture is easily diluted, after which it can be applied even on an uneven surface. Its only drawback is the cost - 25 kg will cost four times more than the same amount of adhesive, which has less adhesion properties.

6. If you need acrylic tiled glue, you can purchase Bolars WallFix Keramik. As expected, this product comes in a plastic bucket. It has high adhesion, however, at sub-zero temperatures, the properties of the adhesive are significantly reduced. Therefore, this product is not intended for outdoor use.

7. In the case of work with natural or artificial stone will have to buy Glims WhiteFix. This glue is more expensive than most other options, but it provides ideal grip properties. The dried solution is able to withstand negative temperatures, and all sorts of spray, and other troubles.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings