mylogo

To quickly and reliably glue different materials in large quantities using glue gun. It has a handle for holding it comfortably, and an automatic feed when you press the trigger for a binder. The heating element melts the solid polymer and firmly adheres to the surface. It is used for the repair and fixation of various finishing materials, insulation. Dressing can be made with the help of patterns from the adhesive itself. In warehouses, it is easier to attach a label to the cargo. Our ranking of the best glue guns shows the most popular tool models for the construction, trade, logistics and consumer industries that will help you make the right choice.

 

 

Glue gun

Top net glue guns

Such a tool is used at a stationary place of work at a table or in a small room. These are pistols for home and repair inside the building.

Connecting to a power outlet allows you to use them throughout the day, so choosing a piece of equipment can only be determined with power and performance.

Steinel GLUEMATIC 3002 - the most affordable professional model.

Steinel GLUEMATIC 3002 - the most affordable professional model.

This is the best glue gun from professional units due to the affordable price of 1200 rubles and the presence of high performance, affecting performance. The power of the tool is 200 W, which allows you to heat 11 mm rods at a fast speed.

The main advantage of the model is the temperature adjustment by the electronics, so the device is adjusted depending on the speed of work, the ambient air temperature and the spatial position of the surfaces on which the material is applied.

Pros:

  • Lightweight plastic case with a weight of 320 grams will be convenient for long work;
  • the large stroke of the trigger allows you to push the rod at a time for a decent length;
  • metal bracket-stand, so as not to touch the table with a hot nozzle;
  • window to control the residue of adhesive material;
  • interacts with melting elements with a diameter of 11 mm;
  • rods can be inserted up to 20 cm in length, which makes it rarely possible to be distracted to replace them;
  • performance is one of the highest - 16 g / min;
  • compact body 185x30x160 mm easier to maneuver;
  • 3 consumable bars with glue included;
  • in the standby phase consumes 16 watts;
  • during operation, the power of 45 W is constantly maintained, which does not require carrying with a large cross section for operations with a large distance from the outlet;
  • temperature adjustment;
  • good body assembly without play;
  • built-in valve to prevent adhesive leakage.

Minuses:

  • large trigger is not very convenient to press during small hard work;
  • heats up for a long time (from 7 to 10 minutes);
  • no protection against drops;
  • no network indicator;
  • To turn on or turn off the power it is necessary to unplug from the outlet (there is no separate button on the case).

Dremel 930 F.013.093.0JC - for decorative trim

Dremel 930 F.013.093.0JC - for decorative trim

Such glue gun will be the best for decorating walls and other surfaces due to the presence of two temperature regimes in it, which allows you to set the desired value for different compositions and spatial position.

The set comes immediately 18 rods as transparent and with colored glitter, which is useful for a volumetric finish. The curved handle is more convenient in creative work. At the end of the handle there is an extended base for setting on a flat surface. The second point of support is the frame under the nozzle.

Pros:

  • stylish curved design;
  • two modes of operation that are switched on the handle with a toggle switch;
  • perforation to prevent overheating;
  • control window;
  • wide stroke trigger for the promotion of large quantities of material;
  • plastic stand folds under the trunk, so as not to interfere during operation;
  • the wide supporting part on the handle allows you to quickly free your hands by placing the tool on the table;
  • The power of 100 W is optimal for performance, but saves energy during use for 10-12 hours;
  • the price of 1200 rubles is suitable for this multitasking device;
  • weight is only 200 grams;
  • the device heats up 5 minutes before full readiness;
  • drip protection is provided on the nozzle, which will prevent the surface from being inadvertently dirty;
  • 18 rods complete with varying temperature sensitivity.

Minuses:

  • rods up to a diameter of 7 mm and no longer than 10 cm can be inserted;
  • due to its low weight, it is easy to knock it down with a small push of the table;
  • interferes with stability and hard wire.

Stavr PK-11/100 - from crafts to shoes

Stavr PK-11/100 - from crafts to shoes

This is the best network glue gun for domestic use due to the affordable price of 580 rubles and ease of operation. The case has a switch and a diode indicator showing readiness for use.

With the help of the device, you can make various decorations for the school exhibition, close the interpanel stitches for self-repair and even glue off the soles on the shoes. The power of the gun is 100 W, which is optimal for the domestic sphere.

Pros:

  • comfortable trigger with notches for three fingers, so that they do not slide off while working;
  • control window;
  • opening metal stand for the location of the included device on the table;
  • narrowed nozzle for fine uniform flow;
  • control of work and shutdown on the case;
  • the price is 580 rubles;
  • power is 100 W;
  • interaction with rods 11 mm in diameter;
  • heating to 180 degrees gives a high performance of 16 g / min;
  • light weight of the device (400 grams) is convenient for continuous use during the day;
  • heating to full readiness for 1 minute;
  • Includes 2 rods and a replaceable nozzle;
  • after heating, the electricity consumption is 20 W;
  • holds the check valve well.

Minuses:

  • no temperature adjustment;
  • no protection against drops;
  • large - body length 265 mm may be inconvenient for small work;
  • the length of the adhesive mortgage no more than 10 cm will require more interrupted for replacement with large volumes.

Best cordless glue guns

These are tools for professional use to perform repair tasks remotely or at height, and not be limited to wire.

With their help, fix insulation or finishing materials on the roof, attics and basements. They are used for sealing joints between various building materials.

Bosch Glue Pen 0.603.2A2.020 - compact and versatile

Bosch Glue Pen 0.603.2A2.020 - compact and versatile

Such a battery glue gun will be the best for accurate and accurate application, since it has an even body, where fixing with a hand is performed as with an ordinary ballpoint pen.

The trigger is pulled with the index finger. Rubber pads are provided at the top and bottom to prevent the tool from slipping. The power button on the right and the light indication are very convenient. The protruding part of the new rod does not interfere.

Pros:

  • compact straight hull shape;
  • powered by a 5.4 watt battery;
  • battery and charger included;
  • the lightest weight in this category of goods 142 grams is very convenient;
  • rod length up to 15 cm;
  • drip protection is provided on the nozzle;
  • USB connector allows you to charge the gun even from the phone adapter;
  • up to 6 rods can be melted per charge;
  • The tool is comfortable to hold in your hand.

Minuses:

  • high price of 2500 rubles;
  • interaction with rods with a diameter up to 7 mm.

STEINEL NEO1 334109 - for sealing thin seams

STEINEL NEO1 334109 - for sealing thin seams

This gun is conveniently controlled to seal thin joints due to the narrowing shape of the body to the nozzle, which gives a good overview of the working area and the ability to accurately point the dispenser at the application site.

From one charge, the device is able to work for 30 minutes, which will allow to perform a large volume at a remote distance from the outlet. The body of the gun is as light as possible (150 grams) for a comfortable hold.

Pros:

  • built-in drip protection;
  • The li-ion battery has no memory and can be recharged at any time;
  • compact length of 179 mm;
  • quick bar replacement;
  • start within 15 seconds;
  • automatic adjustment of the supply of heat and shutdown;
  • the power button on the end eliminates accidental pressing during operation;
  • the most narrowed nose in front of the dispenser gives a good overview of the working area.

Minuses:

  • the cost of 2400 rubles;
  • charging time is 3 hours;
  • no temperature adjustment;
  • rods only 7 mm in diameter.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings