Not so long ago, in stores selling various gadgets for the car, a new marketable product appeared - automotive additives. According to the sellers, these tools improve the performance of various units. However, various experts tested the compositions of these additives, and found that some devices are useless, while others not only do not help the devices, but also cause irreparable damage. Because of this, before buying such additives, it is worthwhile to find out which remedies are better and which ones can and should be used in specific cases. Do not forget that the performance of both a separate mechanism and the vehicle as a whole depends on the choice of this tool.
Content:
Automotive additive which company to choose
There are various rumors about the products of these companies, but there is still no unequivocal opinion. The benefits of additives in any case exist, but it depends too much on the coincidence of many factors. Companies use various microelements with which it is better to get acquainted prematurely so as not to harm their vehicle.
This rating is based on information that was obtained from user reviews:
1. ER
2. RVS
3. Liqui moly
4. Castrol
The best car additives that are used in the engine
Oil-Verlust-Stop
This product will be relevant for those buyers who own a machine that has problems with oil wiring. This additive eliminates oil leaks and returns elasticity to rubber and plastic gaskets.
Another advantage is the reduced amount of oil consumed on small rings and on valves that guide them. Smoke exhausts cease to be black, noise decreases when the engine is running. In addition, compression is restored with an additive.
This tool is used for both gasoline and diesel engines, but this is not all - it is also useful for engine oil. Judging by the ratio of the price of the additive and its high quality - one of the most decent options in this market.
Based on many reviews of satisfied customers, we have formed the following positive aspects:
- In oil seals and gaskets, oil stops leaking;
- The resources of the system being carried out are increased;
- Reduced noise, which manifested itself in a working engine;
- Low cost.
Negative:
- It is effective not in all nodes conducting oil.
SegaTes
The additive was created on the basis of liquefied ceramics, supplemented with various microelements, the composition of which most involved calcium with magnesium. The manufacturer also added components to the additive that help reduce friction due to its anti-friction properties.
All components with the help of boron nitride are combined with metal, forming a smooth surface. As a result, friction decreases, power rises and fuel costs are reduced. In addition, the wear rate of parts is reduced, the engine is normalized and the probability of breakage decreases.
According to customers, the only drawback of this tool is the need to clean the engine before adding the additive. In addition, it should be added only to the new oil, which is why the purchase should be planned in advance.
The main advantages of this additive, which we have formed according to customer reviews, are as follows:
- Powerful trace elements;
- Power increase;
- Normalization of the motor;
- Reduced probability of breakage.
Minuses:
- High cost of funds.
RVS Master Engine
This manufacturer also uses a ceramic coating in its product. Additives of this group are distinguished by the fact that they are used for engines not only cars and trucks, but also for other equipment. The lion's share of the additive uses magnesium and silicon compounds, because these elements on the outer part of the parts create a special thinnest film that protects them from damage in any modes.
This additive is very different from others, because because of the durable film, it is able to hold onto the details several times longer than the coating, which consists of zinc or chromium. The tool allows you not only to protect parts from wear and other long-term work surplus, but also to restore them, repairing various cracks and cavities that constantly arise during prolonged loads. Because of this feature, compression in cylinders is normalized. Due to the fact that the engine reduces its own production, oil consumption is normalized and the combustion in mixtures in the cylinder is optimized.
Based on the reviews of many buyers, the model has the following advantages:
- Protection of metal parts from prolonged wear;
- Restoration of compression in the cylinders;
- Elimination of minor cracks and damage.
Minuses:
- High price.
The best car additives that are used in fuel
ER
This additive is very popular in Japan among companies that sell used cars. Her research involved in many laboratories in the world, and then concluded that its use is highly effective. It reduces the friction of steel parts with each other, due to the properties that condense the metal.
Manufacturers claim that it increases engine power and accelerates torque, while reducing fuel consumption. Many user reviews say that the use of this additive in old cars is almost a miracle. It increases the period between the oil change, and the engine starts to work much quieter. It is necessary to pour this additive into the oil during its replacement, as when adding directly to the engine the effect does not appear.
The main advantages of the additive, which we identified based on feedback from satisfied customers, are as follows:
- Increases engine power;
- Torque growth;
- Saves oil consumption;
- Low cost.
Minuses:
- Not suitable for all cars.
Liqui Moly Speed Tec
This additive is intended for gasoline. It increases power several times and increases the torques of any engines operating on it. Due to the fact that it contains no components containing metal, it is a harmless means for the engine.
The additive acts very quickly, improving the fuel, so that the combustion of gasoline occurs at the same temperature in the combustion chamber. As a result, the engine power increases. The volume of one bottle of this product with the head is enough for a full tank of 65+ liters. In addition, some users of this tool, judging by their reviews, use it as an additional protection of the engine system from various manifestations of corrosion, in the event of an idle car.
The main charms of this tool, based on feedback from satisfied customers, are as follows:
- There are no compounds that include metal;
- Vehicle movement becomes smoother;
- The intake system is cleared;
- The increase in torque.
Minuses:
- This tool will be effective only in tandem with poor-quality fuel.
Castrol tda
This tool, designed for diesel fuel, is quite complex and multifunctional. The corrosion process slows down quite a bit, the lubricating properties of the fuel are improved, and the oxidation that occurs during engine operation decreases.But that's not all, the tool reduces or completely removes all the negative effects on car parts that cause sulfur compounds. All these actions occur without changing the viscosity and density of diesel fuel.
This tool can be used in any season, but it is best manifested itself in winter. It is then that it weakens the load on the engine most of all, due to which a cold start is possible. Another plus in favor of the additive - it was put on the second place in the test of the means of Za Rulem magazine.
Based on many positive customer reviews, it has the following positive qualities:
- Optimization of the engine operation process during the winter season;
- No effect on diesel viscosity;
- Obstruction of corrosion;
- Improved lubricating properties.
Negative:
- At other times of the year, except in winter, its use is not as effective.
Top car additives used in gearboxes
RVS Master TR3
Trading company RVS Master quickly gained momentum in Russia. She offers a special tool that is added to the oil used in the mechanical transmission, the gearbox or the main gear. This composition contains a huge amount of silicates and other trace elements, with the help of which a thinnest ceramic coating is formed on the surface of parts. It can not only prevent damage to gearbox components in the future, but also eliminate some defects or oxidation elements immediately after use.
As a result of using the tool for gears and other parts that move, geometric parameters are restored. Due to this, the dynamic parameters of the car are improved and the fuel consumption per kilometer is reduced. In addition, the intensity of noise and vibration decreases. This additive is suitable for regular use only.
User feedback has enabled us to identify the following advantages of the tools:
- Reduced fuel consumption;
- Improving the parameters of the car;
- The intensity of the noise decreases;
- Details are covered with a thin film that protects them from damage.
Minuses:
- With irregular use of funds there is a chance to harm their own motor means.
Liqui Moly GearProtect
This tool is a rather expensive additive in PPC, which reduces wear on parts. Its effect is that friction is reduced in various transmissions that are subjected to high loads. With their help, gear changes are improved, and the efficiency of each of them increases.
This tool is valid for a long time - up to 150 thousand kilometers. To achieve the desired effect, you need to add it every time you change the gear oil. This method of application is not simple, but the syringe, with the help of which the injection is carried out, is included, so that there are no particular problems. This is an expensive but effective remedy suitable for any machines.
The main advantages of this tool, which we have identified with the help of customer reviews:
- Providing soft parts protection against oxidation;
- Gearbox noise is reduced;
- Increased efficiency;
- Long acting.
Minuses:
- High price.
What car additive to buy
1. For owners of old cars that are subject to great wear and corrosion, it is recommended to purchase additives of models ER and SegaTes. They reduce the friction of parts between themselves, increase engine power and reduce fuel consumption. In addition, their difference is extremely low cost and noise reduction, which comes from the parts.
2. To reduce parts wear, it is recommended to use Liqui Moly GearProtect, which is used in the gearbox. It reduces friction in transmissions due to the formation of the thinnest film. With the help of a special syringe, which is included, you need to do regular injections, after which the efficiency of gear changes increases.
3. Diesel-powered car owners choose Castrol TDA.It acts multifunctionally, slowing down corrosion processes and improving the lubricating properties of fuel. In winter, it is the best tool for diesel fuel.
It will be interesting to friends too
