8 best anti-decubitus mattresses

Of course, it is best when such a thing as an anti-decubitus mattress is not at all required. But, if a bed patient appeared in the family, it is better to arrange his stay with maximum comfort. Bedsores - the problem of static, immobility. Special mattresses presented in the selection allow you to avoid skin lesions, as well as prevent the development of muscle fiber atrophy in some seas.

Trives VF 2500: compression-collapsing anti-decubitus mattress

From the usual mattress, this mattress is different cellular structure. Each cell contains a small amount of air. With the help of a compressor, air is forced into one section of cells and removed from the other.

Thanks to this system, a regular reduction of the load on the patient’s body lying on the mattress is achieved. Since there is no constant pressure on the same place, there are no pressure sores on the skin, a person can relax with comfort.

Pros:

• aesthetic appearance, the side of the mattress looks like a regular mat;
• there are flaps that help avoid the mattress from the bed;
• the casing is made of non-toxic materials;
• pressure can be adjusted on the compressor, focusing on the weight of the patient;
• the pump starts every 6 minutes, changing the air pressure in the cells;
• the mattress can be cleaned with mild detergents.

Minuses:

• do not fold the filled cells;
• the compressor is noisy, especially interferes at night.

Barry Serio: Anti-decubitus Honeycomb Mattress with Static Mode

This mattress is suitable for patients lying motionless after a stroke or patients suffering from partial immobility.

Thanks to a special system of pressure change on the adjacent points, the load on the fabric is reduced. When this is achieved prevention of the occurrence of bedsores, tissue atrophy does not develop. Air vents in the cells allow you to maintain a regular change of reference points.

Pros:

• continuous operation is provided;
• every 12 minutes, the upper or lower side cells are swapped;
• pressure is regulated at the compressor;
• cells allow air to pass between the mattress and the skin of a person lying down;
• Mat is used for the prevention and treatment of bedsores.
• low noise level - only 28 dB.

Minuses:

• the compressor is required to be connected to the mains;
• only one section in the mattress.

J002A Mega-Optim: balloon (tubular) anti-decubitus mattress

This mattress is best suited to combat the already formed bedsores and to prevent the appearance of skin atrophy. The compressor alternately pumps air into even or odd rows of pipes, alternating sections. This allows you to achieve the effect of mechanical massage.

Constantly changing the level of air in the tubes helps to improve blood circulation in the tissues and reduce pressure on the skin. Thanks to the ventilation holes, additional airflow is carried out on the skin, the likelihood of prickly heat, peeling of the skin, and rubbing is reduced.

Pros:

• the compressor is equipped with a filter;
• the pressure level is adjustable, there is data on the output power at the compressor;
• there is a light indication;
• mattress fabric is waterproof;
• there are laser vents;
• average cost: about 6,000 rubles.

Minuses:

• if the pipe is damaged, the mattress is difficult to repair.

BRONIGEN BAS-3000 H: with ventilation system

Every 8 minutes the compressor fills the cells of this mattress in a checkerboard pattern. The pressure on the patient's skin is changed, which prevents the appearance of diaper rash and pressure sores. Permanent massage does not interfere, it feels like a slight movement of the surface of the bed under the back.

Laser perforation provides additional ventilation, which lowers the temperature of the mattress, improves air microcirculation and reduces sweating.

Pros:

• when folded, the mattress takes up little space, it is light - only 2 kg;
• round-the-clock operation is provided;
• airflow creates an additional layer between the skin and the mattress;
• there are special liners that do not allow the mattress to slide off the bed;
• the surface of the mattress is easy to clean, does not accumulate odors.

Minuses:

• power cord for compressor is short;
• you need to make sure that the tubes are not bent.

Novea 574: three-section anti-decubitus mattress

This is a worthy mattress that can make a bed patient's life comfortable. The surface of the mattress is water-repellent and easy to clean. Moreover, right on the bed, you can perform hygienic procedures for the patient, without worrying about the safety of the mattress.

The mattress consists of three forming blocks that can be tilted at an angle, placing the patient comfortably. The mattress filler has a shape memory, it adapts to the body of a person lying, reducing the load on the skin. This avoids the occurrence of bedsores and reduces the risk of atrophy of tissues.

Pros:

• orthopedic mattress helps to avoid back fatigue;
• made of heat-sensitive foam that can memorize the shape of the human body;
• You can have a mat on the bed with an inclined headrest;
• there is oilcloth cover;
• does not require an electrical connection.

Minuses:

• high cost: from 10 000 rubles.

Roho SOFFLEX® 2: with the adaptive effect of cells

If the patient settles down on this mattress, redness and pressure sores are guaranteed not to appear on his body, since thanks to a special sequential air pumping system, the mattress adapts to the body of the patient lying down.

The manufacturer has thought over the design of this product. The cells are not located diagonally, as in standard anti-decubital mattresses, but in a checkerboard pattern. The mat itself is divided into three sections, in which an independent adjustment of air pressure is provided with a hand pump.

Pros:

• the mattress is made of polyurethane, is not afraid of moisture, all hygiene procedures with the patient can be performed directly on it;
• system operation does not require external power sources;
• using a mattress reduces body contact with the bed surface;
• maintains loading to 150 kg;
• The function of replacing damaged cells is provided.

Minuses:

• very expensive: about 56,000 rubles.

Invacare Softform Premier Visco: Anti-decubitus Effect

Despite its softness, this mattress effectively prevents the development of pressure sores. It is made of a viscoelastic material capable of taking the shape of the body of a person lying, while reducing the load on the body and skin. Inside the mattress is a separate unit pillow. The material of the mat is very dense, it is sensitive to body temperature, thus avoiding overheating and sweating of the patient.

Pros:

• the mattress can be used as a normal orthopedic mattress;
• the mattress is placed in an elastic waterproof cover;
• the cover is zipped;
• maintains loading to 247 kg;
• reduces excess pressure on the skin.

Minuses:

• very heavy: 13 kg;
• high cost: about 59,000 rubles.

Armed M4S1 (KZ): four-piece mattress with leatherette cover

Dense mattress is suitable for long-term operation, it can even be used by several patients consistently.Leatherette cover does not accumulate odors, so the patient will not experience discomfort. Since the mattress is divided into four sections, it can be placed comfortably under the back of the patient. If necessary, raise the legs of a person lying down, while feeding, put the headrest in an inclined position.

Pros:

• filler material has a memory function;
• forming sections do not heat up;
• the cover closes with a zipper and can be removed for cleaning;
• suitable for patients weighing up to 125 kg;
• reasonable price: about 2 600 rubles.

Minuses:

• from the mattress slips bedding.

Cellular anti-decubitus mattresses are popular with customers: they are best suited for standard beds, well prevent diaper rash. Mats with a tubular structure also prevent the occurrence of pressure sores, they are more suitable for people who are able to assume a sitting position. Forming mattresses are also suitable for the prevention of tissue atrophy, they help to organize the optimal microcirculation of air.