Decking is made from an iron sheet coated with an anti-corrosion agent. It has a wavy surface for stiffening a thin-walled structure. Polymer, zinc, or polyurethane may be used as a staining material. The professional flooring in thickness of sheets, a form of relief and the sizes differs. The color scheme allows you to select this building element for any design. We have compiled a rating of the best professional flooring for wall decoration, facade decoration, roofing, flooring, fence construction and gates, which will help users to determine the parameters of a product for specific needs.
The best bearing sheeting
The name itself suggests the features of such a professional flooring - it has increased strength to act as a supporting framework for withstanding heavy loads.
The material has a cross section of up to 1.2 mm thick and is used to cover hangars, containers, manufacture powerful gates and floors.
H75 Grand Line Optima Zn 0,8 mm galvanized - for permanent steel formwork
This is the best bearing sheeting for the manufacture of permanent formwork, because it has high strength and will keep the pressure from the solution until the latter solidifies.
A feature of the sheet is the height of the profile outpipes of 75 mm, which ensures reliable preservation of the shape.
On the inner plane made additional grooves that increase the rigidity of the frame. Two corners are present at each vertex of the trapezoidal profile, which adds strength to the structure.
Pros:
- galvanized electroplated coating protects the material from corrosion;
- long service life of at least 50 years;
- completely fireproof;
- due to its high strength, it will withstand the pressure of concrete and other materials;
- 0.8 mm steel section provides independent stiffness and resistance to mechanical shocks;
- ecological clean sheets;
- maintains heating to 140 degrees;
- allowed to use fewer supports at the roofing arrangement (4.5 meters step);
- Available in lengths from 500 to 1200 mm, which is convenient when creating formwork of various sizes;
- A useful width of 750 mm needs only 50 mm of entry on the entire sheet.
Minuses:
- high cost of 600 rubles per m2;
- due to the high profile structure, it is more difficult to cut sheets with a grinder (the gearbox clings to the protrusions with a small disk);
- weight 11.2 kg per m2 needs a good foundation;
- strongly flashes in the sun due to the galvanized surface without color, which will require closure of it with other materials or additional painting of the exterior parts.
C21 Grand Line Optima Pe 0.7 mm RAL 3009 - to create a container or garage
This is the best bearing profiled for making a garage in the yard or a container for storing materials, because the sheet is painted on both sides with a polymeric substance that is resistant to atmospheric precipitation and has a beautiful red color that does not need additional finishing.
A shallow wave with a height of 21 mm makes it easy to mount profiled overlapping with varying degrees of overlap, depending on installation conditions. The wall thickness of 0.7 mm, in combination with the trapezoidal shape of the profile, gives the necessary rigidity.
Pros:
- a light weight of 4.5 kg per m2 will not create an excessive load on the substrate;
- easily cut by mechanical and electrical means;
- beautiful red color;
- polymer coating withstands negative temperatures and ultraviolet radiation;
- the glossy look gives to a construction from a professional flooring more presentable form;
- 0.7 mm wall section is optimal for the construction of light load-bearing structures;
- of the total width, useful only 51 mm less, which gives high savings;
- Available in lengths from 500 to 1000 mm;
- the thickness of the decorative coating of polyester 25 microns and under it contains a primer, a chrome-plated layer and zinc;
- a low corrugation is easier to fasten to a wooden base (nothing prevents the cartridge from pressing against the surface);
- symmetrical design allows you to create walls of any length with good appearance and without pronounced joints.
Minuses:
- cost from 593 rubles per m2;
- not the largest sheets in length (1000 mm), which will require the creation of several rows for the hangar.
The best carrier wall sheeting
This type of material is used for the manufacture of fences, gates, wall and roof finishes. Its cross section varies from 0.5 to 0.8 mm, which is able to withstand high static loads. The size of the profile is chosen based on the location of the sheets in space.
MT 18 1150 (1100) PE 0,5 Viking MT - for a long fence
This is the best base and wall profiled to create a beautiful fence due to the wide choice of colors from dark red (RAL3005 to deep green RAL8017), as well as a high layer of protective coating of 35 microns, which will withstand year-round exposure to atmospheric phenomena in the form of sun and precipitation.
He is also afraid of significant temperature drops. Service life under such conditions reaches 25 years minimum. The sheets have a low shape with a wave of 18 mm and smooth transition lines, which gives a high rigidity and aesthetic appearance for the front part of the fence.
Pros:
- simple installation due to the low profile and convenience of the instrument attachment;
- beautiful bright colors, resistant to fading;
- the ability to join sheets overlap without a highly visible joint;
- ease of cut by the given sizes;
- wall thickness of 0.5 mm has an optimal weight, so as not to load the fence racks, but sufficient strength to the wind and mechanical shocks;
- high corrosion resistance;
- smooth waves are easily blown by the wind and less collect dust on their walls;
- well retains its properties at high temperatures up to 120 degrees;
- noble matte surface "Viking", created by polymerization;
- increased plasticity, useful for unloading and installation, and preventing accidental damage to the goods.
Minuses:
- cost from 500 rubles per m2;
- from the width of 1250 mm the useful part is the indicator of 1150 mm, which gives a small overrun compared to other varieties of corrugated flooring.
C8 Grand Line Quarzit light 0.5 mm RAL 7024 - for gates
To create a corrugated door, the low structure of the material is important, where this pattern is the best. The height of the trapezium is 8 mm, and the long surface of the protrusions is convenient for mounting to the frame to make a single structure.
The graphite color according to the RAL7024 system is optimal for decorating the gate due to its low marcos. The polyurethane surface better protects the inner steel sheet from moisture and preserves the beautiful appearance of the gate even after many years.
Pros:
- long service life of a professional flooring (about 30 years);
- over time, the surface is allowed to paint in a different color at will;
- a mass of 4.5 kg per m2 will not create excessive loads on the goal posts and will not lead to premature damage to the hinges;
- simple installation due to low profile;
- 0.5 mm thickness on the metal frame is optimal for preserving the integrity of the structure and resisting mechanical stress;
- The total width of 1200 mm, from which the useful 1160 mm, gives a high saving material;
- Available in sheets from 500 to 8000 mm, which is practical when planning high gates;
- polyurethane coating thickness of 25 microns;
- high resistance to fading due to the organic layer;
- material transfers temperature to 120 degrees without deformations;
- can withstand not only moisture, but also salt fog;
- high plasticity;
- resistance to shock back to 18 j.
Minuses:
- decorative color is present on the one hand, so the second will have a less presentable appearance;
- cost from 620 rubles per m2.
The best wall sheeting
Such building materials are used in the decoration of walls and facades of buildings. They are lightweight and a variety of colors to be combined with the overall design of the building.
The wall thickness varies from 0.35 to 0.5 mm, which is optimal and economical due to the absence of increased loads. Additional areas of use are fences and various types of floors.
C8 Grand Line Optima Pe 0.35 mm RAL 1014 - for ceiling
This is the best profiled flooring for finishing the ceiling in industrial premises and warehouses due to the beautiful ivory color, which reflects the light well inside, and produced sheets of 8000 mm length, which allows you to mount solid sheets on the ceiling with the minimum number of cuts.
The low profile shape of 8 mm gives a small air gap for insulation and is convenient when working with fasteners (the length of the bits is enough to easily fasten the sheets to the base).
Pros:
- beautiful color for interior decoration;
- attractive price from 250 rubles per m2;
- easy cutting with a mechanical tool (even with metal shears);
- the small weight allowing installation with a wide step of wooden elements of a framework;
- polymer coating with a layer of polyester provides corrosion protection and the possibility of wet cleaning the surface;
- bends easily for plant edges in hard to reach places;
- when joining two sheets, only 40 mm of width is spent, which saves material;
- the choice of length of strips from 500 to 8000 mm;
- does not sustain combustion;
- coating thickness 25 microns;
- the presence of a primer under the polyester and a chrome layer.
Minuses:
- due to a cross section of 0.35 mm, it can easily get dents when carelessly handling.
It will be interesting to friends too
