To create a perfectly flat surface for laminate and tile, dry formulations are used called “self-leveling floor”. The mixture differs from the screed more liquid type and the absence of large granules, which ensures the smooth spreading. Self-leveling floors are also suitable as a finishing material, without subsequent covering. The smooth structure of the upper layer looks attractive and does not require further processing with abrasives. Find out from the ranking of the best self-leveling floors popular brands for creating ready-made coatings for shopping centers, garages, indoor sports grounds, roller-dromes, public and industrial institutions, as well as apartments and houses.
The best bulk floors cheap class
Bulk floor Volma Nivelir Comfort - for a bathroom and a bathroom
This is the best way to create a flat surface in rooms where it is important to carry out repairs as quickly as possible. Self-leveling floor practical practical self-leveling, which will allow only a little spread it over the surface and will not leave traces of the construction brush.
The second advantage is the rapid hardening, allowing to pass on the created floor after 4 hours, which will make the toilet inaccessible for use only for this time. The mixture is supplied in bright blue bags of 20 kg each.
Pros:
- average price from 260 rubles per 20 kg;
- complex astringent sand and modifying additives provide high strength of the finishing layer;
- the mixture is suitable for manual and mechanized work;
- suitable for pouring cables and pipes from underfloor heating;
- well spreads and does not leave marks and stains from a brush;
- consumption of 12 kg per m2 with a layer height of liqueur 10 mm;
- the mixture is stored in the bag for 12 months, so the repair can not be made immediately after purchase;
- it is allowed to pour a layer up to 100 mm;
- after 4 hours you can walk;
- plasticizer additives in the composition;
- in small rooms you can do without seams;
- Suitable for laminate, carpet or linoleum.
Minuses:
- it is allowed to pour on a concrete base, which has already passed 3 months after installation;
- all metal elements on the floor that will come into contact with the self-leveling floor must be coated with paint to protect against corrosion;
- a deformation seam in rooms with a diagonal greater than 10 m is required;
- lay cover is allowed only after a week.
Bulk floor Knauf Tribon - one of the fastest in time subsequent installation
This is the best self-leveling floor, if the priority is not the time to start using the walking room, but the need to quickly install the final coating in the form of linoleum, tile or laminate.
This is possible with this mixture due to the presence in the composition of gypsum and Portland cement, which gives high strength and rapid solidification. Lay the finishing layer in 24 hours. The composition is delivered in white bags with green and blue inscriptions of the brand.
Pros:
- self-leveling composition spreads without grooves and depressions with a thickness of 10 mm, which simplifies the process of pouring and leveling;
- convenient packaging of 20 kg for transfer to the place of repair;
- Attractive price from 215 rubles for 20 kg is one of the most affordable products in this category;
- designed for laying warm floors with good heat transfer to the top;
- after pouring it is allowed to walk on the floor after 6 hours;
- can be poured on a mineral or wooden base, which makes the mixture suitable in log houses;
- works are allowed at temperatures up to +35 degrees;
- gypsum and cement in the composition;
- Laying linoleum or tile is allowed within a day;
- strength of the composition is suitable for industrial premises and warehouses with racks and regular travel of loaded trucks;
- high sound insulation properties.
Minuses:
- the life of the solution is only 60 minutes;
- fill layer up to 60 mm, which may not be enough to level strong differences;
- you can not pour the mixture, if the room temperature is below +5 degrees;
- consumption up to 17 kg per m2 with a layer height of 10 mm;
- The composition does not tolerate direct sunlight, so it is not suitable for outdoor use.
Bolars SV-210 Optim - for warehouses and workshops
This is the best self-leveling floor for use in places with increased load, because the polymer layer on the surface makes it extremely durable and not subject to force-induced cracks. Such floors will withstand a pressure of 150 kgf / cm2, or one and a half tons per square meter.
The cost of the floor starts from 240 rubles per pack of 20 kg, and it is sold in paper bags of purple color. It is distinguished by its composition and rapid solidification, allowing technological use after 4 hours.
Pros:
- the possibility of applying a layer from 2 to 10 mm, which depends on the needs in a particular room;
- good self-leveling;
- structure strength is 15 MPa;
- suitable for filling the system with a warm floor;
- a smooth result that meets the requirements for flooring linoleum or floorboard;
- gypsum-cement base with modifying additives and polymers;
- tile can be put after 3 days;
- consumption of 15 kg per m2 at a height of the cast layer of 10 mm;
- dry can be stored for up to 12 months without loss of properties;
- good wear resistance;
- adhesion to the surface of the base 1 MPa;
- operation of the finished frozen floor at temperatures from -40 to +70 degrees;
- designed for all existing finishes;
- with proper dilution, the evenness indicator corresponds to the laser level;
- nice glossy shine.
Minuses:
- only for interior work, due to poor tolerance of ultraviolet radiation;
- not suitable for basements and swimming pools due to dampness;
- parquet allowed to lay after 7 days of drying;
- the mortar hardens in 40 minutes, which requires pre-planned quick installation steps;
- When water is added excessively, foam forms, hardening on the surface and needing to be scraped.
The best self-leveling floors of expensive class
Weber Vetonit Fast Level - for a spacious room
These are the best self-leveling floors for a spacious room where it is most difficult to get absolute evenness. The mixture has fine granules with a grain size of not more than 0.6 mm, which ensures good dissolution and movement during spontaneous leveling.
The material is combined with any types of flooring that allows you to use it as a carpet, and under the flooring. Comes in yellow and blue paper bags of 20 kg.
Pros:
- quickly hardening composition, which can be walked after 4 hours;
- laying of the finish is allowed after 24 hours;
- tolerates moderate mechanical loads;
- it is allowed to pour the mixture onto concrete, cement and plaster surfaces;
- convenient to align with a needle brush;
- fine grains in the composition ensure perfect smoothness of the final result;
- consumption of 16 kg per m2;
- the composition is designed to envelop the elements of a heated floor with a good temperature transfer;
- withstands wet conditions without destruction.
Minuses:
- the cost of one bag from 320 rubles;
- Layer thickness up to 60 mm is allowed;
- expiration date of expensive means of only 6 months;
- hardens very quickly (in 30 minutes), so you will have to work with an assistant.
Weber Vetonit Finish Level - for economy at large volumes
This is the best self-leveling floor when casting in large volumes, when high quality is required and you need to save. The composition is designed for the finish and create the thinnest layer with a super smooth effect.
Although a bag of 20 kg costs from 570 rubles, you can apply a layer of 1 to 5 mm on a cheap screed, which reduces the cost of filling a level of 100 mm by doing most of the sand cement and getting a mirror result on the surface.
Pros:
- very economical consumption during finishing application (20 kg will be enough for 13 m2);
- you can walk on the surface after 3 hours;
- does not deteriorate due to internal heating when the floor heating system is located;
- possesses water resistance;
- size of filler fractions not more than 0.3 mm;
- only 5 liters of water are needed per bag;
- compressive strength 18 MPa;
- good adhesion to concrete 0.8 MPa;
- if you need laying the flooring, it is allowed in a day.
Minuses:
- cost from 570 rubles;
- the lifetime of the solution is 20-30 minutes.
It will be interesting to friends too
