mylogo

Resanta voltage stabilizers are very popular due to the high quality of the equipment assembly and reasonable price, compared with similar products from other manufacturers. The devices protect home appliances from burning at increased power surges and allow them to work properly with a falling power supply in the network. Learn from the ranking of the best stabilizers Resanta which models are best suited for homes, villas, garages, small workshops and garden works using electrical equipment.

 

 

Resanta voltage stabilizers

The best single-phase (220 V) Resant voltage regulators

For a private house or apartment, where a weak power transmission network is connected, a single-phase stabilizer is enough that will serve household appliances and power tools.

When choosing you need to be guided by the parameters of power, taking into account the number of household appliances in the house, and indicators of incoming current.

RESANTA ASN-10000/1-Ts - for the water pump

RESANTA ASN-10000/1-Ts - for the water pump

The device has a margin of maximum power load up to 10 kW, which allows you to power the refrigerator and use it for a water pump and pumping from a well in a private house. Even when the voltage drops to 140 V, these two units will be able to work properly.

The device has a display that shows one of the three network parameters, and numerous openings in two rows on the side walls that prevent overheating.

Pros:

  • rubber feet prevent slipping on a smooth table or floor;
  • weight of 18 kg is convenient for rearrangement by one person;
  • The small dimensions of 220x230x385 mm make it possible to place it under a table or on a shelf in a garage;
  • electronic stabilization circuit;
  • it works even when the network drops to 140 V;
  • maintains normal voltage at jumps up to 260 V;
  • high-speed microprocessor with consumer disconnection with an increase in the over-tolerable current;
  • there is no distortion of the sinusoid in the work;
  • Efficiency is 98% when using the device at 80% power;
  • response speed with a shutdown of 0.2-0.3 s;
  • durable metal housing;
  • two flexible handles are convenient during transportation;
  • information on work disturbances;
  • cost 9000 rubles;
  • possibility to choose the type of connection via bypass or with stabilization.

Minuses:

  • the display shows only one of the three quantities (to see the following, switching on the body is necessary);
  • the error in the testimony is 8%, so if the value of 220 V may actually be 202 V.

RESANTA ACH-1000N2 / 1-Ts - with two sockets

RESANTA ACH-1000N2 / 1-Ts - with two sockets

The model refers to the best because of the affordable price of 2400 rubles and the presence of two sockets on the case, which allow you to connect two devices at once without using twins. It is convenient for the boiler and gas analyzer in a private house, or wiring lighting in the courtyard.

The maximum power in this case is 1000 VA, so it will not be possible to power the numerous household appliances through it. The relay principle of stabilization is suitable for precision electronics and even medical equipment.

Pros:

  • A light weight of 3.7 kg is convenient for moving around the house, depending on which device you need to connect through a stabilizer (you can take it to the garage and work with the tool, and then return it to the house and power the TV);
  • compact dimensions of 260x200x110 mm;
  • wall installation is possible, which saves space on the floor or shelf;
  • low price of 2400 rubles;
  • perforation even on the front panel to reduce overheating;
  • two sockets under the display are already grounded;
  • neat assembly with an oval display suitable for any interior;
  • relay type stabilization;
  • equipment operation support with incoming 140 V;
  • no distortion of the output waveform;
  • high efficiency of 98%;
  • reaction to disconnect consumers at high voltage surges 5-7 ms;
  • signals overload;
  • meets the high fire safety requirements for placement in an apartment or house.

Minuses:

  • To view the indicators on the display (switching the input and output current), you must press the red button;
  • after several years of work, it may be necessary to replace the machine;
  • load power not more than 1 kW.

RESANTA ASN-20000/1-C - to ensure the voltage of the whole house

RESANTA ASN-20000/1-C - to ensure the voltage of the whole house

This stabilizer has a power reserve of up to 20 kW, while it is designed for one phase and can be connected to the household network and provide the entire house with voltage.

Having such a reserve for the load even when the voltage drops to 190 V, the device will be able to provide enough current for all household appliances and power tools. Large body on wheels should be placed in the garage or boiler room due to its angular shape and large size.

Pros:

  • LED lights included modes;
  • wheels to move the device;
  • four blocks of perforated holes on each side;
  • large load margin of 20,000 VA;
  • relay stabilization;
  • provides a voltage of sufficient level when the input falls to 140 V;
  • protects against short circuit;
  • power filters remove the sine wave distortion still at the input;
  • Efficiency 97%;
  • overheat protection with automatic shutdown;
  • functions properly with incoming 260 V;
  • microprocessor control to minimize errors.

Minuses:

  • weight 60 kg is difficult to transport;
  • a large building of 350x330x440 mm should be installed in a garage or other room;
  • the cost of 220,000 rubles.

The best three-phase (380 V) Resant voltage regulators

When a weak three-phase line is connected to a workshop or private enterprise, this can interfere with work, and voltage surges can burn the internal winding of an expensive instrument.

In this case, install the best three-phase voltage regulators Resant, characterized by a simple design and affordable price.

RESANTA ASN-20000/3 - with a minimum error

RESANTA ASN-20000/3 - with a minimum error

The device is designed for 380 V and provide equipment and power tools with a voltage of 20 kW maximum, which allows you to connect even a lathe or painting booth.

Manufacturers made the most simple design to save on the final cost. The principle of operation is electromechanical, therefore, the error in the actual readings and on the instruments is only 2%.

Pros:

  • the vertical case has a small width and is conveniently located under the wall so as not to protrude strongly forward in a small panel board;
  • large power margin of 20,000 VA;
  • high accuracy of the output current 380 V with an error of + 2%;
  • response speed when disconnecting 10 ms;
  • operates at an input voltage of 240-430 V;
  • safety controllers protect against overheating or short circuit.

Minuses:

  • cost of 37,500 rubles;
  • no display;
  • no wheels to move heavy installation;
  • air cooling for such an apparatus may not be sufficient in the warm season;
  • Electromechanics does not tolerate frequent voltage surges, so it is suitable for areas with a periodic (once per hour) drop or increase in current.

RESANTA ASN-30000/3-Ts - for powerful production

RESANTA ASN-30000/3-Ts - for powerful production

The model is designed for the simultaneous connection of several machines and a variety of power tools in conditions of unstable voltage readings of a three-phase network.

The load margin is 30 kW. To connect the internal line there are special holes in the housing, and the door is securely closed to avoid accidental contact with exposed parts of the terminals.

Pros:

  • electronic type of stabilization allows you to adjust the current despite frequent fluctuations up or down;
  • work is fully automated and controlled by the processor;
  • there are three displays with voltage indication for each phase;
  • can connect machines and tools with a total power of 30000VA;
  • work with incoming 240-420 V.

Minuses:

  • error of 8%;
  • cost 45,000 rubles;
  • weight 57 kg

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings