In the market of heating devices, infrared heaters, operating on the principle of exposure to objects of the sun's rays, are becoming increasingly popular. Having heard about their effectiveness, many users want to install these devices in themselves, but they face the question of the right choice. Having studied the rating below, you can not only get useful information for yourself, but also decide on the most suitable model.
Content:
Infrared heater which company choose
List of rated manufacturers of heaters:
1. Sinbo is a Turkish company providing its services in the market of small-sized household appliances. The heat emitters produced at the enterprise are of high quality, therefore they are very popular in many countries;
2. Almac is a Russian company engaged in the manufacture of ceiling and / to heaters. Thanks to the use of high technologies, premium-class devices are produced, which are sold at the sites of the Russian Federation, the CIS and the EU;
3. Ballu is a group of Asian companies specializing in the production of climatic equipment. High-speed manufacturing has covered many countries in the world where high-tech quality products are assembled;
4. Zilon is a well-known brand of modern heating equipment, which is produced in Izhevsk at the IZTT plant. Today, the company is the largest in Eastern Europe and the leading manufacturer of thermal appliances in Russia;
5. Noirot is a French company with a rich history and a world leader in the creation of electric heating devices. More than 40 types of products are widely known in 93 countries on different continents.
Rating best infrared heaters
To compile an objective rating, the marketing principles of selection were taken into account, as well as feedback from users owning the consumer goods in question.
- Popularity and quotation of models based on consumer opinions.
- Heating device power and heating area.
- The type of infrared element, for example, carbon or quartz.
- Installation site of a wave radiator: bathroom or bedroom, loggia or cottage, office or workshop; wall, floor, ceiling.
- Protection against: splashing water, overturning, overheating.
- Other construction, as well as operational and technical characteristics: dimensions and / to the heater; the speed and degree of temperature rise; used materials and parts; quality, reliability and brightness of the lamps; noiseless operation; economical effect; the presence of a thermostat, timer, PU, etc.
- The manufacturer's name is its rating on the market.
- Lifetime and warranty; cost; appearance.
Top floor infrared heaters
S = 4.0 m3 / h
DELTA D-018 is a mechanically controlled floor model that operates during continuous operation in 4 heating modes. The necessary climatic parameters are provided by a fan, which evenly dissipates heat, and by an air humidifier using water from the built-in tank. Thermostat monitors indoor temperature.
Advantages:
- type of heating element: quartz;
- power levels (P): 1.0 / 2.0 kW;
- price: 1.7 ... 2.5 thousand ₽;
- in case of overheating, the automatics disconnects the power supply to the heater; separate inclusion of 4 lamps;
- light; mobile; economical; warms up quickly and is cheap.
Disadvantages:
- lamps periodically burn out;
- near the device the floor overheats.
Judging by the reviews, there are significantly more pluses than minuses. The emitter copes well with its tasks. Pays for itself with interest.
S = 8.0 m3 / h
NeoClima NQH-04 - floor model with power adjustment by means of switches - can work on a choice of 1-on or 2-ve lamps at once. In the event of a device tipping over, the protective system is activated.
Advantages:
- type of work item: quartz;
- steps P: 0.4 / 0.8 kW;
- dimensions: 0.31 / 0.37 / 0.15 m;
- price: ≈1,0 thousand ₽;
- spare lamps;
- inexpensive; economical; heats well; does not affect the oxygen-moisture balance.
Disadvantages:
- selectively short-lived lamps.
Users in their correspondence speak positively about the device. The only thing is that the life of some lamps is short - you have to install spare ones or, if the warranty has expired, change them for your money.
S = 15.0 m3 / h
Ballu BHH / M-09 - compact halogen model with mechanical adjustment of the energy level - after turning on the 1st or 2 buttons, the heater in a few seconds goes to the planned temperature. In order to avoid overheating and the effects of tipping over, the device is equipped with reliable protection systems.
Advantages:
- type of radiation element: halogen;
- P modes: 0.45 / 0.9 kW;
- dimensions: 0.30 / 0.37 / 0.14 m;
- weight / price: 1.1 kg / 0.7 ... 1.4 thousand rubles;
- hydro-protective housing;
- quickly goes to working power; does not reduce the humidity and composition of oxygen in the air; does not raise dust; shines brightly, but not blind;
- mobile; easy to operate; has a stylish design; worth a little.
Disadvantages:
- some lamps quickly fail; during assembly, moisture protection is not always arranged;
- bright glow interferes with sleep.
Reviews of the floor emitter are good - a lot of positive things, except for the durability of the lamps. Opinions were divided relatively brightly: one likes it, the other does not.
S = 23.0 m3 / h
Sinbo SFH-3325 - floor-wall model with mechanical control and indication of inclusion. With the help of: power switch the air temperature is regulated; automatic - off when falling. The device is optionally equipped with a timer.
Advantages:
- type of infrared element: carbon;
- power (P): 2.5 kW;
- dimensions: 1.52 / 0.43 / 0.04 m;
- weight / price: 14.0 / 2.6… 4.7 thousand ₽;
- ellipsoid version of the spiral; gentle and maximum radiation mode;
- is transferred; heats up powerfully - the effect is felt already in the first minute after switching on; just exploited; does not burn oxygen; does not emit odors; affordable worth;
- after dismantling the post support, it can be attached to the wall.
Disadvantages:
- takes a lot of space; unstable tripod; plastic legs sometimes crack;
- in the first minutes noisy; consumes above average energy.
From the reviews the following summary: a popular conventional and / to heater with many pluses and certain disadvantages.
S = 29.0 m3 / h
Maximus AR 2002 - floor-wall model with mechanical power adjustment, which can be set to 3 levels. Equipped with a thermostat that controls temperature fluctuations, and a shutdown system for excessive heating. Can work using PU.
Advantages:
- main element type: quartz;
- P settings: 0.9 / 2.0 / 2.9 kW;
- dimensions: 0.95 / 0.26 / 0.16 m;
- weight / price: 3.6 / ≈ 5.0 thousand;
- high efficiency of about 93%; 30-second period to achieve a comfortable level of heating; approximately 11 hours of continuous operation; installation on the open areas is allowed;
- heats quickly and silently; Does not expose to oxygen and dust; consumes the required minimum of email. energy; does not provoke odor; not “afraid” of drops and splashes; just mounted and operated; serves for a long time;
- when appropriate, mounted on the wall.
Disadvantages:
- not identified.
Characteristics (technical and operational) are positive; reviews - the very best. Conclusion: the heater is excellent.
S = 35.0 m3 / h
Veito CH1800XE - floor standing vertical model with 2 working capacities, which are installed manually. It is equipped with a protective mechanism in case of overturning. In stock pen for easy carrying.
Advantages:
- type of wave element: carbon;
- fixed P: 0.85 / 1.7 kW;
- dimensions: 0.17 / 0.82 / 0.08 m;
- weight / price: 2.8 / ≈12.3 thousand ₽;
- no restrictions on the service life; lightning fast set of set operating parameters; low power consumption; housing protection from moisture;
- does not lower humidity and does not "eat" oxygen;
- Portable, safe, silent, steady, externally refined.
Disadvantages:
- fragility;
- despite stability, vertical structures periodically overturn.
This device, judging by the reviews, is an excellent heater, but not in rooms with constant bustle.
The best wall infrared heaters
S = 4.0 m3 / h
Nikaten 200 - wall heating plate, the heating of which is mechanically regulated. A thermostat is provided to monitor the temperature dynamics. In the event of a fire hazard, a shutdown device is activated.
Advantages:
- heater panel material: ceramic;
- P: 0.2 kW;
- dimensions: 0.60 / 0.30 m;
- weight / price: 7,0 / ≈ 3,5 thousand ₽;
- reaching a stable temperature - after 1/3 h after switching on; cooling with heat lasts 1.5 hours; minimum power consumption;
- has heat accumulating properties; does not freeze through; does not make noise; does not need supervision; creates a favorable microclimate; just mounted; aesthetic looks; affordable worth; wide selection of colors.
Disadvantages:
- skepticism of the population, manifested in the forums.
In the reviews there is no negative - a solid positive: a spectacular efficient heater with a lot of advantages.
S = 8.0 m3 / h
Zilon IR-0.8 S is a wall-ceiling model that comes in the trade both in the standard version and with additional options. It is completed with an electronic thermostat that is responsible for compliance with the real temperature and the set one. When the device overheats, protection with automatic restart is activated. Brackets for attachment to the surface are purchased separately.
Advantages:
- type of heating element: flamentin (anodized panel);
- P: 0.8 kW;
- dimensions: 1.19 / 0.13 / 0.04 m;
- weight / price: 3.2 / 2.0 ... 2.4 thousand ₽;
- does not evaporate moisture; does not burn O2; does not make noise; does not smell; does not worsen the health of people; can perform local or additional heating;
- compact size; minimum energy consumption; easy management; esthetic appearance; democratic value;
- multi-stage quality control at work.
Disadvantages:
- heating and cooling is accompanied by crackling;
- the floor is not warm enough (depending on a number of circumstances).
Reviews show that the wave emitter is a good device with minor drawbacks that do not affect consumer demand.
S = 15.0 m3 / h
Noirot Royat 2 1200 is a wall model that can work in 3 heating modes, so you can use it in rooms with the most different quadrature. To correct the zone of influence, it is possible to turn the device up to 30 °. For convenience, the control unit, depending on the appropriateness, can be attached both on the left side and the right side.
Advantages:
- type of heating element: quartz;
- given by P: 0.3 / 0.6 / 1.2 kW;
- dimensions: 0.45 / 0.12 / 0.11 m;
- weight / price: 1.3 / 6.9 ... 9.7 thousand rubles;
- housing with waterproof properties; fuse from voltage fluctuations;
- light; effectively heats; silently works; air and oxygen, respectively, do not dry or burn.
Disadvantages:
- inconvenient to adjust the power through the rope;
- relatively expensive.
Reviews of the heating device are good. The possibility of warming up local areas, especially bathrooms.
S = 23.0 m3 / h
Sinbo SFH-3325 - this radiator can be installed both on the wall and on the floor - information about it is given closer to the beginning of the article.
S = 29.0 m3 / h
Maximus AR 2002 - the description of this device, which can be mounted in different ways, see through 2 sheets above.
S = 40.0 m3 / h
Zilon IR-2.0EN2 - model of wall-ceiling type, designed for: independent heating of 20 m2 room; additional heating - 40 m2. The device, perforated from the ends, has protection against overheating, as well as an optional thermostat and a swivel bracket for corner mounting.
Advantages:
- type of heating element: flamentin;
- P: 2.0 kW;
- dimensions: 1.63 / 0.26 / 0.04 m;
- weight / price: 7.8 / 3.6… 5.2 thousand ₽;
- contributes to a good microclimate in the affected area; quickly reaches the planned degree of heating; universally mounted;
- compact; economical, aesthetic, eco-friendly, silent, durable;
- The manufacturer guarantees the quality of the presence in the production of multi-level control.
Disadvantages:
- not defined.
In concise comments consumers with sympathy spoke about this device.
S = 50.0 m3 / h
Thermo Glass П-25 peony is a wall-ceiling plate with a glass radiator characterized by high thermal energy return - the plate temperature in working condition reaches +200 ° С. The device is equipped with a thermostat, a device to turn off when the boundary temperature is exceeded and an electronic control system. The heater is designed for heating: 25 m2 in winter; 50 squares in the offseason.
Advantages:
- heating panel material: tempered glass;
- P: 2.5 kW;
- dimensions: 0.84 / 0.59 / 0.02 m;
- weight / price: 9.7 / ≈ 10.4 thousand rubles;
- the kit includes fasteners;
- does not dry the air and does not affect its percentage composition; heats well and comfortably; does not make noise and sounds;
- reliable, durable, durable; looks great.
Disadvantages:
- emits odor if periodically dust is not wiped from the glass; strongly heats the mating surface;
- if it is large, it can reach the required temperature for a long time;
- relatively expensive.
Small cons are present, but consumers, based on reviews, are more interested in the positives.
Top Infrared Ceiling Heaters
S = 4.0 m3 / h
Ikolayn IKO-0.4 is a modernized ceiling plate consisting of a heating element, stone insulation and metal sheets coated with a special compound. Equipped with standard equipment for operation. Installed in small rooms as the main or auxiliary o / n.
Advantages:
- heating element: metal plate;
- P: 0.4 kW;
- dimensions: 0.60 / 0.60 / 0.05 m;
- weight / price: 4.2 / ≈2.8 thousand ₽;
- working surface is heated to 280 ° C;
- economical; lasting; heats well; does not affect air parameters and does not harm health.
Disadvantages:
- there is no timer;
- crackle is heard.
From the reviews it is clear: the usual heater of good quality. It makes no sound or not, it is not known - the views of users divided.
S = 10.0 m3 / h
Almac IK5 - household ceiling model, the heating element of which is made of stainless steel, the body is made of aluminum. It is equipped with automatics, which disconnects the device in case of overheating, and fasteners, under which practical fitting elements are arranged for installation. The thermostat is purchased separately.
Advantages:
- heat radiation element: anodized aluminum;
- P: 0.5 kW;
- dimensions: 0.73 / 0.03 / 0.16 m;
- weight / price: 1.6 / ≈2.4 thousand ₽;
- good warm-up time - from 1 to 3 hours, depending on the starting temperature; silent radiation; O2 is not burned; economical effect in the presence of a thermostat; slim body; external terminal block; 5 current colors;
- fastens on the majority of ceilings as it is not considered fire hazard.
Disadvantages:
- temperature above the norm on the back of the product;
- sometimes it does not warm well (probably a technical reason).
According to consumers: a practical heater without extra amenities and serious weak points.
S = 20.0 m3 / h
Almac IC11 - model with stainless steel heating element, foil screen and basalt fiber heat insulator, located in the cavity of the aluminum case. When overheating is disabled on the machine.To save energy, an additional thermostat is purchased, which is enough for several devices.
Advantages:
- fuel element: anodized Al;
- P: 1.0 kW;
- dimensions: 1.33 / 0.03 / 0.16 m;
- weight / price: 3,3 / ≈ 3,4 thousand ₽;
- energy efficient with a thermostat; quiet at work; quickly raises the temperature to set; does not physically affect the air; easily attached to the ceiling;
- esthetic, eco-friendly, available in the price.
Disadvantages:
- not processed edges;
- there are no innovative technologies in painting.
In fact, the reviews are only positive, with the exception of a few friendly recommendations.
S = 30.0 m3 / h
Zilon IR-3.0 S is a universal model with manual control, which can be installed both on the ceiling and on the wall. With the standard assembly is completed with the minimum necessary number of devices. Optionally available thermostat, swivel bracket and fire safety system.
Advantages:
- type of thermal element: flamentin;
- P: 3.0 kW;
- dimensions: 1.65 / 0.39 / 0.07 m;
- weight / price: 11.2 / 4.6 ... 6.9 thousand ₽;
- quickly heats the surface of objects; does not attract dust; does not create a draft; does not emit burning odors; not buzzing; favorably affects the energy background of a person;
- small-sized, easy-to-manage, energy efficient, aesthetic.
Disadvantages:
- waves unevenly warm the local zone.
In the reviews, users of high opinion of this heater - with rare exceptions.
S = 40.0 m3 / h
Zilon IR-2.0EN2 - since the above device is universal, information about it is already provided in the text above, which deals with wall heaters.
S = 50.0 m3 / h
Thermo Glass P-25 Peony - information about this universal emitter can be obtained in the text section, which describes wall devices.
Which infrared heater to buy
Before buying a wave radiator, you need to know and take into account many parameters and factors. The main ones are: the purpose and dimensions of the room, as well as the humidity in it. In addition, the selection is affected by: the lighting system, the type of main heating, the height and shape of the ceilings, the size and number of windows, the perimeter of the outer walls. Without this data, the choice will be indicative.
1. The bathroom is suitable ceiling or wall unit, which is "not afraid" of spray, does not rust, does not clutter the space, fits into the interior. Suitable: Royat 2 1200 from Noirot.
2. For the kitchen, the selection is carried out according to a similar scheme - you can install a wall-mounted appliance: AR 2002 from Maximus.
3. In the bedroom you need a device that could work at night silently and without a bright glow. On the day, as an option: SFH-3325 from Sinbo; for the night: Nikaten 200 attached above the bed.
4. Any room suitable for a living room that corresponds to the area: CH1800XE from Veito or IR-3.0 S from Zilon.
5. At the cottage, loggia, in the garage you can install: IK11 or IK5 from Almac.
It is not necessary to install one radiator for one room. It would be more expedient to evenly distribute 2 or 3 devices of lesser power throughout the room.
It will be interesting to friends too
